| Owner | Gabriel |
|---|---|
| Location | Montreal, Quebec Canada map |
| | |
| Vehicle | Go-kart Built from a Go-Kart frame I had for gift |
| Motor | Hyster Hydraulic pump 5000lbs forklift motor Series Wound DC 9.5 inches diameter 14 inches lenght Gift from neighbourg. |
| Drivetrain | belt-drive, 1:2 Ratio The first belt has torn apart du to high torque. New one is made with Kevlar. |
| Controller | Logisystems 72 volts 700 amps This is a powerfull controller for the price and light weight. Will run this summer with zilla Z1K We MUST try it |
| Batteries | 200 A123 Systems ANR26650M1, 3.30 Volt, Lithium-Ion Custom made battery pack 10s 10p in each box 70v 23ah weight 30 pounds for 200 cells |
| System Voltage | 70 Volts |
| Charger | Dewalt DC9000 2 Stock Dewalt chargers for battery management: 10 hours charging Custom charger for 15 min fast charging |
| Instrumentation | digital ammeter and volt meter |
| Top Speed | 50 MPH (80 KPH) I don't mesure it, but I feel it like 60 mph. So this is at least 50. |
| Acceleration | Very fast! The acceleration is much bigger than I expected. This is a donuts machine. |
| Range | About 20 mins racing |
| Seating Capacity | 1 adult |
| Curb Weight | 350 Pounds (159 Kilograms) |
| Tires | Racing slik |
| Conversion Time | 6 months part time |
| Conversion Cost | Gift damaged go-kart frame 200can frame pieces and reparation 700can logisystem 72v 700amp controller 2100can for 200 M1 cell Gift 9 inches motor 1000can broken perm132 motor |
| Additional Features | With Lithium-ion batteries, we will be abble to try it on a race track. When the others batteries packs will be assembled. We'll try it with 400 M1 cell at 144v 1000amps with my brother's zilla controller. |
| 7 September 2007 Try the go-kart on streets at 11h30 in the night. The motor broke 10 min later. I think that this is the same problem as neurotikart. I will rebuild this motor and try again. 28 Fév 2008 Trying new A123 systems battery pack this weekend. 24 june 2008 Replace the perm motor for a huge serie-wound forklift motor The perm motor has been rebuilt 6 times. We have too much power for a such small motor. 20 july 2008 The kevlar strap torn apart after 5 min riding. : (((( We have to use sproket | |





