The project in progress...The Inside
OwnerToby Ricco
Owner's Other EVsCustom Electric kart
Custom Electric Scooter Version 1
Indoor Electric Kart (Made for Rick Gaan)
Custom Electric Shifter Kart
Custom Electric Scooter Version 2
LocationLos Gatos, California United States map
Email email image
Vehicle CGK-HO
This is a custom-made, high-performance electric scooter. It was based on a Go-ped iped chassis. Cambrian Go Karts designed and installed a completely new drive train.
MotorMagmotor S28-400 Permanent Magnet DC
This is a powerful, neodymium electric motor. It can put out 4.5 hp continuous and up to 10 hp peak.
Drivetrain-Lithium Iron Phosphate A123 cells
-Magmotor S28-400 (brushed DC)
-Kelly controller
ControllerKelly KDS48200E
This is a 48 volt, 200 amp, high-efficiency controller made by Kelly Controllers.
Batteries36 A123 Systems 2.3ah LFP cells, 3.20 Volt,
These are extremely high-quality lithium iron phosphate batteries. They are capable of doing 360 amps in this configuration. They are wired as 3 cells in parallel and 12 of those sets in series.
System Voltage38 Volts
Lithium-Iron-Phosphate charger. 6 amps, 1hr15min charge time, 43.8 volt cut-off
Top Speed35 MPH (56 KPH)
This scooter is extremely fast for it's size
AccelerationThe scooter is capable of wheelie's
Range7 Miles (11 Kilometers)
The range is 7 miles averaging over 18mph. It can go much further if you drive slowly (such as 10-12 mph like a goped in econo mode)
Curb Weight45 Pounds (20 Kilograms)
TiresStandard hard-rubber Goped tires.
Additional FeaturesThe controller is programmed to cut-off at below 30 volts. This is in order to protect the batteries from over discharge.
This scooter is for sale. Contact Cambrian Go Karts ( for more information.

code by jerry